Desa B Manuel d'utilisateur télécharger pdf (Page 13)

13

104414

OWNER’S MANUAL

INSTALLATION

Continued

WARNING: Failure to posi-

tion the parts in accordance with

these diagrams or failure to use

only parts specifically approved

with this heater may result in prop-

erty damage or personal injury.

INSTALLING LOGS

Each log is marked with a number. These

numbers will help you identify the log when

installing. It is very important to install

these logs exactly as instructed. Do not

modify logs. Only use logs supplied with

heater.

1. Place front log (#1) on top of the grate.

Make sure the notches in the bottom of

the log fits over the grate prongs (see

Figure 16). Push back of logs flush with

metal grate bar.

2. Rest middle log (#2) behind metal posts

on front burner. Make sure the grooves

in the bottom of the log fit over the

grate. Bring the log forward next to the

metal posts. The cut-out on the middle

log must be on top (see Figure 17).

3. Slide the grooves in the back of the rear

log (#3) against the rear grate prongs.

Make sure the peg on the log is on top

(see Figure 18).

4. Place the crossover log (#4) on the back

log and the middle log. Make sure the

peg on the rear log is in the hole in the

bottom of the crossover log. The cross-

over log should fit in the cutout of the

middle log (see Figure 19).

Figure 17 - Installing Middle Log (#2)

Rear Log (#3)

Peg

Grate

Prong

Grate Prong

Rear

Burner

Groove

in Back

of Log

Groove in

Back of Log

Figure 19 - Installing Crossover Log (#4)

Crossover

Log (#4)

Hole

Peg

Cutout

Front Log (#1)

Notch

Grate

Prongs

Metal Grate Bar

Figure 16 - Installing Front Log (#1)

Figure 18 - Installing Rear Log (#3)

Middle Log (#2)

Metal Post

Metal Post

Groove

Groove

Grate

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Commentaires sur ces manuels

Pas de commentaire