Desa 2-Level Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Lumières des projecteurs Desa 2-Level. Desa 2-Level User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
© 2007 DESA Specialty Products™ 598-1275-00
Twin Halogen
Motion Sensing
Light with 2-Level
Lighting
Model 5512
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• 2-Level Lighting Timer.
Photocell keeps the lighting off during daylight
hours.
• LED indicates motion was sensed (day or night).
Requirements
• The Light Control requires 120-volts AC.
If you want to use Manual Mode, the control must be
wired through a switch.
Some codes require installation by a qualifi ed
electrician.
This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
Cover
Plate
Light Control
Sensor
3 Wire
Connectors
Gasket
6 Mounting
Screws (3 sizes)
®
Mounting Bolt
Mounting Strap
Rubber Plug
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST 1 5 20
ON-TIME
Off 3 6 Dusk to
Dawn
2-Level
Lighting
Put ON-TIME switch
on the sensor bot-
tom to TEST and
the 2-Level Lighting
switch OFF.
MANUAL MODE
ON-TIME
TEST 1 5 20
... back on.
AUTO
1 Second OFF
then...
2-LEVEL LIGHTING TIMER
Light comes on half bright for selected time after dusk
(Off, 3 hr., 6 hr., until dawn). If motion is sensed, the
light turns on full bright for the ON-TIME (1, 5, or 20
minutes) then returns to dim mode.
Move ON-TIME Switch to
1, 5, or 20 minutes
Mode Switching Summary
Flip light switch
off for one second
then back on*
MANUAL MODE
AUTO
TEST
Note: When fi rst turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Light Shield
Plastic Hanger
2 Halogen Bulbs
This package includes:
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Mode: On-Time: Works: Day Night
Test 5 Sec x x
Auto 1, 5, 20 min. x
Manual Until Dawn* x
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Lighting

© 2007 DESA Specialty Products™ 598-1275-00Twin HalogenMotion Sensing Light with 2-Level LightingModel 5512Features• Turns on lighting when motion i

Page 2 - INSTALLATION

2598-1275-00INSTALLATIONFor easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the fi xt

Page 3 - TEST AND ADJUSTMENT

3598-1275-00SPECIFICATIONSRange . . . . . . . . . . . . . . Up to 70 ft. (21 m); 100 ft.(30.5 m) with Range Boost. [varies with surrounding te

Page 4 - TECHNICAL SERVICE

4598-1275-00POSSIBLE CAUSE1. A lamp is positioned too close to the sensor or pointed at nearby objects that cause heat to trigger the sensor. (Reposi

Page 5 - FUNCIONAMIENTO

5598-1275-00Modelo 5512Características• Prende la luz cuando detecta movimiento.• Apaga la luz automáticamente.• Temporizador del alumbrado de 2 ni

Page 6 - INSTALACION

6598-1275-00Para una fácil instalación escoja una luz con un interruptor de pared.Para un mejor funcionamiento, instale el aparato a casi 2,4 m del su

Page 7 - ESPECIFICACIONES

7598-1275-00PRUEBA Y AJUSTE❒ Prenda el cortacircuitos y el interruptor de luz. Lo menos sensible Lo más sensibleDetectorMovimientoEl detector es men

Page 8 - SERVICIO TÉCNICO

8598-1275-00POSIBLE CAUSA1. Un faro está colocado demasiado cerca al detector o apunta a objetos cercanos que hacen que el calor active el detector.

Commentaires sur ces manuels

Pas de commentaire