Desa GA2100A Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Fax Desa GA2100A. Desa GA2100A User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Instructions For Installing GA2100A Fan Accessory
Grounding
Plug
Figure 1 - Grounding Plug
Attaching Fan Accessory
1. Knock out center panel at four tabs with screwdriver (see Figure
2).
2. Position fan housing between fan accessory and heater back panel.
Attach fan accessory and fan housing to heater back panel using
four #8 screws (see Figure 3).
Carton Contents
• One Fan Accessory
• One Fan Housing
• Four #8 Screws
• Two #10 Screws
• One #10 Screw (long)
• Two “U” Nuts
• Three Brackets
Grounded Outlet
Wall Mounting Instructions For Models With Mounting
Bracket
1. Mount heater to wall by following steps under INSTALLING TO
WALL in owner’s manual.
2. Plug power cord of fan into grounded outlet.
3. Discard “U” nuts, brackets, and extra screws provided with fan
accessory.
Wall Mounting Instructions For Models With Raised
Mounting Holes
After attaching fan accessory, heater must be mounted to wall in
different manner than what is specified in owner’s manual. Follow
steps below to mount heater to wall.
1. Locate the two raised mounting areas at top of heater back
panel. Each area has a square hole in center and a key hole at
top (see Figure 4).
Figure 5 - Attaching “U” Nut
2. Insert “U” nut into square hole on each mounting area. Attach
“U” nut as illustrated in Figure 5. Push “U” nut into place.
Screw hole on “U” nut should be visible through key hole in
mounting area.
“U” Nut
Figure 4 - Raised Mounting Areas
Raised
Mounting Area
Key Hole
Square Hole
Screw Hole
U Nut
Screw Hole
Continued on Back
Fan accessory must be grounded. Fan comes with a
three-prong, grounding plug as shown in Figure 1. The
plug is your protection against electrical shock. Plug it
into a standard, three-hole, grounded, outlet. If cord
needs replacing, use only a cord with a three-prong,
grounding plug.
WARNING
!
WARNING ICON G 001
If wall mounted, heater must be disconnected from
gas supply and removed from wall before installing
fan accessory. Contact a qualified service person to
do this. All local codes must be followed.
NOTICE
Fan
Accessory
Figure 2 - Center Panel
Center
Panel
Tab
#8 Screw
Fan Housing
Figure 3 - Attaching Fan Accessory and Fan Housing
Vue de la page 0
1 2

Résumé du contenu

Page 1 - WARNING

Instructions For Installing GA2100A Fan AccessoryGroundingPlugFigure 1 - Grounding PlugAttaching Fan Accessory1. Knock out center panel at four tabs w

Page 2 - INTERNATIONAL

3 Attach one bracket to each mounting area. Position bracket asillustrated in Figure 6. Make sure round hole on bracket isagainst heater back panel an

Commentaires sur ces manuels

Pas de commentaire